Foil-faced EPE foam for cold rooms, ducts and pipes
Closed-cell EPE foam with aluminium foil on both faces: how it works for cold rooms, duct and pipe wrap, and insulated liners.
Cold rooms, ducts and pipes have a different heat problem from a shed roof. You are trying to stop heat getting into something cold, and slowing conducted heat matters as much as reflecting radiant heat.
What COOL ROOF EPE is
Closed-cell EPE (expanded polyethylene) foam, 2–3 mm thick and 25–27 kg/m³ density, faced with aluminium foil on both sides.
- The foil faces (96–97% reflectivity) reflect radiant heat.
- The foam's trapped air slows heat conducted through the sheet.
- Closed cells do not soak up water the way open-cell materials can.
Where it is used
- Cold rooms and cool chambers
- Duct and pipe wrap
- Roof and wall insulation for buildings
- Insulated packaging liners
Tips for good results
- Seal all joints with aluminium foil tape so there are no gaps for warm, moist air.
- Wrap ducts and pipes continuously, including bends and joints.
- Where the foil is meant to reflect heat, keep it facing an air space.
- For cold rooms and refrigerated spaces, follow your HVAC or refrigeration contractor's overall insulation design.
Supply
Made at our Badlapur MIDC plant in rolls, with about 7-day dispatch. Platinum Polymers has been in the trade since 1992.
HVAC contractors and cold-room builders: WhatsApp Ms Lavina on +91 70289 75744 for price and samples.
F-1/3, MIDC Kulgaon, Badlapur (East), Thane 421503, Maharashtra, India
Ms Lavina Fernandes
+91 70289 75744
+91 93222 83776
infopolymers@gmail.com
International business: Platinum Polymers Pvt Ltd USA, 9005 Woodway Dr, Irving, TX 75063 · +1 (817) 424-2992 · mitesh@platinumpolymersusa.com
Radiant barrier
Laminates & papers
Industrial Packaging
COOL ROOF is the insulation brand of Platinum Polymers Pvt Ltd.

