Getting the GSM right: how each layer of a foil laminate affects cost and performance
BUILT TO YOUR GSM

Getting the GSM right: how each layer of a foil laminate affects cost and performance

Paper weight, PE coat weight and foil gauge each change barrier, seal strength and price. How to set the right GSM for your pack.

Two laminates that look the same can perform very differently, and cost very differently, because of the weight of each layer. When we say "built to your GSM", this is what we mean.

The paper layer

A heavier paper gives more stiffness and a more solid feel, and adds cost. Too light, and the pack can feel flimsy or wrinkle on the machine. Our reference 4-ply build uses 41 g/m² glassine.

The foil layer

Foil gauge is measured in microns. Our reference build uses 9 µm foil, which weighs about 25 g/m². Foil is usually the most expensive layer per square metre, so the gauge should match the barrier your product really needs.

The PE tie layer

The middle PE (17 g/m² in our reference build) bonds paper to foil. Too little and the layers can separate; too much is wasted cost.

The PE heat-seal layer

The inner PE (35 g/m² in our reference build) makes the seal. Heavier coats give stronger, more forgiving seals on fast machines, at more material cost. The right weight depends on your machine, sealing temperature and dwell time.

Putting it together

Our reference build totals 118 g/m² with zero joints per roll. Across our range, total weights run from about 80 to 200 g/m², and we set each layer per order instead of forcing you onto a standard list.

What to send us

  • Your current structure and weights, or a sample
  • Product and pack type (strip, sachet, pouch)
  • Machine and reel width
  • Monthly quantity

We will suggest a build that meets the spec without paying for grams you do not need. WhatsApp Ms Lavina on +91 70289 75744.

← More guides from Platinum Polymers

PLATINUM POLYMERS PVT LTD

F-1/3, MIDC Kulgaon, Badlapur (East), Thane 421503, Maharashtra, India

Ms Lavina Fernandes

+91 70289 75744
+91 93222 83776
infopolymers@gmail.com

International business: Platinum Polymers Pvt Ltd USA, 9005 Woodway Dr, Irving, TX 75063 · +1 (817) 424-2992 · mitesh@platinumpolymersusa.com

COOL ROOF is the insulation brand of Platinum Polymers Pvt Ltd.

WhatsApp us