What 97% reflectivity and 0.03 emissivity actually mean
READING THE SPEC SHEET

What 97% reflectivity and 0.03 emissivity actually mean

Reflectivity and emissivity are the two numbers that decide how well a radiant barrier works. What they mean, and how they are tested.

Radiant barrier spec sheets are full of numbers. Two of them matter most for performance: reflectivity and emissivity.

Reflectivity

Reflectivity is the share of incoming radiant heat that a surface bounces back. COOL ROOF FWF has a reflectivity of 97%: of the infrared radiation reaching its foil face, about 97% is reflected and only about 3% is absorbed.

Emissivity

Emissivity measures how readily a surface gives off radiant heat, on a scale from 0 to 1. Dull, dark surfaces are close to 1. Polished aluminium is very low. FWF has an emissivity of 0.03, so even when it warms up it radiates very little heat into the space below.

For a radiant barrier, you want high reflectivity and low emissivity, and for an opaque surface like foil the two go together.

How we test

Our radiant barrier grades are checked against recognised methods:

  • Reflectivity and emissivity: ASTM E408
  • Grammage: ISO 536
  • Tensile strength: ASTM D828
  • Water-vapour transmission: ASTM F1249
  • Low/high temperature integrity: ASTM C1263 (stays flexible, no delamination at −29 °C and +66 °C)

Comparing products

When you compare radiant barriers, ask for the reflectivity or emissivity figure and the test method behind it. Metallised films such as our MWM grade (92–95% heat reflectivity) cost less and suit many jobs; aluminium foil faces such as FWF give the highest reflectivity.

Keep it clean

Dust, paint or damage on the reflective face raises emissivity and reduces performance, which is one more reason to install carefully and keep an air gap next to the shiny face.

Want the full spec sheet for a grade? WhatsApp Ms Lavina on +91 70289 75744.

← More guides from Platinum Polymers

PLATINUM POLYMERS PVT LTD

F-1/3, MIDC Kulgaon, Badlapur (East), Thane 421503, Maharashtra, India

Ms Lavina Fernandes

+91 70289 75744
+91 93222 83776
infopolymers@gmail.com

International business: Platinum Polymers Pvt Ltd USA, 9005 Woodway Dr, Irving, TX 75063 · +1 (817) 424-2992 · mitesh@platinumpolymersusa.com

COOL ROOF is the insulation brand of Platinum Polymers Pvt Ltd.

WhatsApp us